Fire Fighting Pump

Electric fire fighting pump

-Vertical shaft, split design, stator, discharge head, multi-stage or single-stage turbine pumps.
-Vertical shaft turbine pumps are produced with a closed type impeller as a standard. It can also be produced as a semi-open or open type impeller upon request.
-The direction of rotation is counterclockwise when viewed from the motor side.
-SVDP Series pumps are used a water lubricated housing system as a standard. Optionally, an oil lubricated housing system can be used.
-SVDP Series pumps are used with high-efficiency class electric motors according to IEC construction sizes.
-Pump and motor shafts are connected to each other by rigid coupling.
-It can be driven by different types of electric motors, optionally. Vertical Solid Shaft Electric Motor, VHS Type Vertical Hollow Shaft Electric Motor, Right Angle Gear Drive, Vertical Pulley Assembly.

" />

Diesel fire fighting pump

-Horizontal ring section, multistage, centrifugal pumps with closed impellers and di¬users in end suction design.
-7 Models from DN 40 up to DN 150 discharge flange diameter.
-Suction nozzle flanges conform to EN 1092 - 2 / PN 16 and discharge nozzle flanges conform to EN 1092 - 2 / PN 40 (PN 63) (For steel or stainless steel casing pumps, flanges comform to related pressure class ratings defined in EN 1092 - 1)
-Discharge flange is on top for standard production, upon request di¬erent discharge flange positions can be applied.
-All impellers are balanced dynamically or statically according to ISO 1940 class 6.3.
-Axial thrust is balanced by impeller balancing holes system.
-Direction of rotation is always counter clockwise viewed from drive end. That’s why these pumps can not be accouppled directly with diesel engines.
-Bearings of ARS-U type pumps are grease lubricated. Sleeve bearing used in the suction side is lubricated by the pumping liquid.

Diesel fire fighting pump

-Centrifugal pumps with vertical shaft, split body, diffuser, multistage, closed impeller.
-8 models from DN 32 to DN 150 discharge flange diameter.
-Suction flanges according to TS EN 1092 - 2 / PN 16 and discharge flanges to TS EN 1092 - 2 / PN 40 (PN 63). (flanges in pumps with stainless steel body material according to TS EN 1092-1 standard pressure class.)
-ARS-DY and ARS-DY pumps are used with high efficiency electric motors according to IEC size.
-Pump and motor shafts are connected to each other with elastic coupling.
-All impellers are balanced dynamically or statically in accordance with ISO 1940 class 6.3.
-Axial force is balanced by impeller balancing holes system.
-The direction of rotation is counterclockwise when viewed from the motor side.
-In ARS-DY and ARS-DY type pumps, “grease lubricated” bearings are used as standard. The plain bearings used on the underside of the pumps are lubricated with the pressed liquid.