Water Supply Vertical Turbine Pumps

SVDP Series Vertical Turbine Pumps

-Vertical shaft, split design, stator, discharge head, multi-stage or single-stage turbine pumps.
-Vertical shaft turbine pumps are produced with a closed type impeller as a standard. It can also be produced as a semi-open or open type impeller upon request.
-The direction of rotation is counterclockwise when viewed from the motor side.
-SVDP Series pumps are used a water lubricated housing system as a standard. Optionally, an oil lubricated housing system can be used.
-SVDP Series pumps are used with high-efficiency class electric motors according to IEC construction sizes.
-Pump and motor shafts are connected to each other by rigid coupling.
-It can be driven by different types of electric motors, optionally. Vertical Solid Shaft Electric Motor, VHS Type Vertical Hollow Shaft Electric Motor, Right Angle Gear Drive, Vertical Pulley Assembly.

SVDP Series Vertical Turbine Pumps

ARS-DY Series Vertical Multi Stage Pumps

ARS Series Multi Stage Pumps

-Horizontal ring section, multistage, centrifugal pumps with closed impellers and di¬users in end suction design.
-7 Models from DN 40 up to DN 150 discharge flange diameter.
-Suction nozzle flanges conform to EN 1092 - 2 / PN 16 and discharge nozzle flanges conform to EN 1092 - 2 / PN 40 (PN 63) (For steel or stainless steel casing pumps, flanges comform to related pressure class ratings defined in EN 1092 - 1)
-Discharge flange is on top for standard production, upon request di¬erent discharge flange positions can be applied.
-All impellers are balanced dynamically or statically according to ISO 1940 class 6.3.
-Axial thrust is balanced by impeller balancing holes system.
-Direction of rotation is always counter clockwise viewed from drive end. That’s why these pumps can not be accouppled directly with diesel engines.
-Bearings of ARS-U type pumps are grease lubricated. Sleeve bearing used in the suction side is lubricated by the pumping liquid.

ARS-DY Series Vertical Multi Stage Pumps

-Centrifugal pumps with vertical shaft, split body, diffuser, multistage, closed impeller.
-8 models from DN 32 to DN 150 discharge flange diameter.
-Suction flanges according to TS EN 1092 - 2 / PN 16 and discharge flanges to TS EN 1092 - 2 / PN 40 (PN 63). (flanges in pumps with stainless steel body material according to TS EN 1092-1 standard pressure class.)
-ARS-DY and ARS-DY pumps are used with high efficiency electric motors according to IEC size.
-Pump and motor shafts are connected to each other with elastic coupling.
-All impellers are balanced dynamically or statically in accordance with ISO 1940 class 6.3.
-Axial force is balanced by impeller balancing holes system.
-The direction of rotation is counterclockwise when viewed from the motor side.
-In ARS-DY and ARS-DY type pumps, “grease lubricated” bearings are used as standard. The plain bearings used on the underside of the pumps are lubricated with the pressed liquid.

ARS-U Series Multi Stage End Suction Pumps

ARS-KC Series Opposite Impeller Pumps

ARS-D Series Vertical Multi Stage Pumps

ARS-U Series Multi Stage End Suction Pumps

-Centrifugal pumps with horizontal shaft, split body, diffuser, multistage, closed impeller.
-11 models from DN 25 to DN 250 discharge flange diameter.
-Suction flanges according EN 1092 - 2 / PN 16 and discharge flanges to EN 1092 - 2 / PN 40 (PN 63). (flanges in pumps with stainless steel body material according to EN 1092-1 standard pressure class.)
-In standard production, the suction flange is on the coupling side and on the right side, the discharge flange at the other end and top (R 4/2). If flange positions other than standard manufacture are required, this request must be specified at the time of order.
-All impellers are balanced dynamically or statically in accordance with ISO 1940 class 6.3.
-Axial force is balanced by impeller balancing holes system.
-The direction of rotation is clockwise when viewed from the motor side.
-ARS type pumps use “grease lubricated” bearings as standard.

ARS-KC Series Opposite Impeller Pumps

-Horizontal shaft, split body, diffuser, multistage, closed impeller centrifugal pumps. 2 models from DN 40 to DN 50 discharge flange diameter.
-ARS-KC type pumps have long bearing life due to the opposite impeller design.
-Suction flanges comply with TS EN 1092 - 2 / PN 16 and discharge flanges comply with TS EN 1092 - 2 / PN 40. (Flanges in pumps with stainless steel body material comply with TS EN 1092 - 1 standard related pressure class.)
-In standard manufacturing, the suction flange is on the coupling side and on the right side, the discharge flange is on the other end and top (R 4/2).
-If flange positions other than standard manufacturing are desired, this request must be specified at the time of order.
-All impellers are balanced dynamically or statically in accordance with ISO 1940 class 6.3.
-Axial force is balanced with impeller balancing holes system.
-The direction of rotation is clockwise when viewed by the engine.
-ARS-KC type pumps use “grease-lubricated” bearings as standard.

ARS-D Series Vertical Multi Stage Pumps

-Centrifugal pumps with vertical shaft, split body, diffuser, multistage, closed impeller.
-8 models from DN 32 to DN 150 discharge flange diameter.
-Suction flanges according to EN 1092 - 2 / PN 16 and discharge flanges to EN 1092 - 2 / PN 40 (PN 63). (flanges in pumps with stainless steel body material according to EN 1092-1 standard pressure class.)
-ARS-D and ARS-DY pumps are used with high efficiency electric motors according to IEC size.
-Pump and motor shafts are connected to each other with rigid coupling.
-All impellers are balanced dynamically or statically in accordance with ISO 1940 class 6.3.
-Axial force is balanced by impeller balancing holes system.
-The direction of rotation is counterclockwise when viewed from the motor side.
-In ARS-D and ARS-DY type pumps, “grease lubricated” bearings are used as standard. The plain bearings used on the underside of the pumps are lubricated with the pressed liquid.